MFC HYDROS II Full Pack

The Hydros II FW1075 pack’s front wing generates gradual lift while maintaining ease of control in bigger, more critical waves.

When it reaches top speed, it allows for continuous turns with minimal effort, while maintaining glide. This HYDROS is a very fast hydrofoil that pumps and connects waves easily.

Designed for riders under 180lb, the Hydros 1075 is ideal for medium to large surf, and high-speed winging. The HYDROS is built in Carbon/PCS/Epoxy Technology and weighs 2.78kg.

Front Wing FW 1075
MFC’s Front Wing generates a lot of gradual lift and they are very easy to control. Built with MFC Mold Technology with Carbon Twill, PVC core and G33 Bio Resin, it is one of the most advanced wings on the market. It reaches an excellent top speed allowing continuous turns without much effort, keeping gliding. Its V-Shapes allows easier turns keeping speed and gliding with low effort.

Built in Carbon/PCS/Epoxy technology, and designed with one of the thinnest profiles. For surfers up to 180lb. — Weight: 1.10kg | Wingspan 65.3cm

MAST C70
The profile allows control, speed and no drag at all. Not much lift is generated by the mast itself, everything is concentrated on the wings. Our technology allowed the mast to reach maximum stiness and no torsion for speed, control, carving. The attachment to the board is a full Carbon/Epoxy molded plate with a plate recess of 2mm to allow the mast to fit in perfectly. RTM Technology built with Carbon/Epoxy G33 Bio Resin. Length of 70cm. — Weight || 1.6Kg

FUSELAGE
Aluminium built, FW and Mast attachment are conic to allow a perfect and precise fitting. It comes in a length of 63cm. —Weight || 500gr

BACK WING | BW 225
The Hydros II back wing 225 is built in full carbon and is MFC’s all around back wing. The BW225 works with all of their foils and is ideal for winging and surfing in any conditions. Built with Full Carbon — Weight || 180gr

BACK WING | BW 300
The Hydros II back wing 300 is for beginner wing foilers as well as big riders will use this back wing in light wind conditions in conjunction with bigger front wings. Built with Full Carbon — Weight || 180gr

SHIMS
Hydros is delivered with three shims; 0, 1.5 and 2.5. Shims are needed to adjust and control the Angle Of Attack (AOA) of the back wing. Shims help dictate the amount of lift we will achieve from the back wing. The bigger the AOA the most Lift we will have, the smaller the AOA the most speed you will achieve. These should be chosen in relation to the size of the front wing that is being used.